Abstract

The southern rural regions of Hawassa village, Ethiopia customarily practices Chika-pet and adobe masonry houses. They use soil, wood and teff straw adobe bricks in house construction, due to its extreme poverty and unsophisticated manner of living. These houses are unsustainable and flimsy due to its inclusion of easily degradable raw materials, non-engineered construction practice, poor earthquake resistance and rapid climatic uncertainties. Moreover, the soil utilized for the adobe brick making is consumed from far away distant regions by ignoring their native Hawassa soil due to its unsuitable brick making characteristics. This impacts the economical expenditure of the poor income inhabitants. Therefore, this research is intended to facilitate the Hawassa village inhabitants by improving their native soil characteristics on adding lime and considers it for brick unit formation. In addition, an alternative reinforcement called pineapple leaf fibre is introduced for the adobe brick making which enriches compressive and tensile strength at a satisfactory rate according to the California Building Standard Code (CBC) requirement. The maximum compressive strength is recorded as 4.1 MPa which is 6 times greater than the conventional specimens and flexural strength is recorded at an improved rate of 0.78 Mpa. It ensures the standard requirement according to the CBC code. As a result, a sustained residual tensile load is recorded which indicates an efficient improvement in the ductility failure of brick. The bending test data is processed to estimate young’s modulus in tension highlighting the bi-modularity of the earthen composite material. The experimental correlation between various mechanical properties is presented and modelling design equations are proposed in the engineered manner of design/assessment purposes. A comparative study and cost analysis of the existing and proposed approach is discussed to validate the superiority of the proposed concept.

Keyword

Rural development, House construction development, Brick masonry units, Adobe brick, Poor inhabitants, Economical construction materials.

Cite this article

Daniel JJ, Basoro D, Gebrie M

Refference

[1][1]Babé C, Kidmo DK, Tom A, Mvondo RR, Boum RB, Djongyang N. Thermomechanical characterization and durability of adobes reinforced with millet waste fibers (sorghum bicolor). Case Studies in Construction Materials. 2020; 13:1-13.

[2][2]Olacia E, Pisello AL, Chiodo V, Maisano S, Frazzica A, Cabeza LF. Sustainable adobe bricks with seagrass fibres. Mechanical and thermal properties characterization. Construction and Building Materials. 2020; 239:117669.

[3][3]Bertelsen IM, Belmonte LJ, Fischer G, Ottosen LM. Influence of synthetic waste fibres on drying shrinkage cracking and mechanical properties of adobe materials. Construction and Building Materials. 2021.

[4][4]Tavares GR, Magalhães MS. Effect of recycled PET fibers inclusion on the shrinkage of adobe brick. Academic Journal of Civil Engineering. 2019; 37(2):545-50.

[5][5]Ige O, Danso H. Physico-mechanical and thermal gravimetric analysis of adobe masonry units reinforced with plantain pseudo-stem fibres for sustainable construction. Construction and Building Materials. 2021.

[6][6]Kafodya I, Okonta F, Kloukinas P. Role of fiber inclusion in adobe masonry construction. Journal of Building Engineering. 2019.

[7][7]Ouedraogo M, Dao K, Millogo Y, Aubert JE, Messan A, Seynou M, et al. Physical, thermal and mechanical properties of adobes stabilized with fonio (digitaria exilis) straw. Journal of Building Engineering. 2019; 23:250-8.

[8][8]Muñoz P, Letelier V, Muñoz L, Bustamante MA. Adobe bricks reinforced with paper & pulp wastes improving thermal and mechanical properties. Construction and Building Materials. 2020.

[9][9]Sudhir MR, Beulah M, Rai PS, Gayathri G. A microstructure exploration and compressive strength determination of red mud bricks prepared using industrial wastes. Materials Today: Proceedings. 2021; 46:163-9.

[10][10]Malkanthi SN, Balthazaar N, Perera AA. Lime stabilization for compressed stabilized earth blocks with reduced clay and silt. Case Studies in Construction Materials. 2020; 12:1-8.

[11][11]Gebino G, Muhammed N. Extraction and characterization of ethiopian pineapple leaf fiber. Current Trends in Fashion Technology & Textile Engineering. 2018; 4(3):20-6.

[12][12]Lopattananon N, Panawarangkul K, Sahakaro K, Ellis B. Performance of pineapple leaf fiber–natural rubber composites: the effect of fiber surface treatments. Journal of Applied Polymer Science. 2006; 102(2):1974-84.

[13][13]Mishra S, Misra M, Tripathy SS, Nayak SK, Mohanty AK. Potentiality of pineapple leaf fibre as reinforcement in PALF-polyester composite: surface modification and mechanical performance. Journal of Reinforced Plastics and Composites. 2001; 20(4):321-34.

[14][14]Parvej AD, Usmani TM, Danish M. Growth of pineapple cultivation: a spatio-temporal analysis in India. Growth. 2020; 4(2):505-11.

[15][15]En T. Natural stone test methods-determination of compressive strength. Turkish Standards Institute, Ankara. 2007.

[16][16]En B. 1015-11, Methods of test for mortar for masonry. Determination of Flexural and Compressive Strength of Hardened Mortar. 1999.

[17][17]Jones RM. Stress-strain relations for materials with different moduli in tension and compression. AIAA Journal. 1977; 15(1):16-23.

[18][18]Aymerich F, Fenu L, Meloni P. Effect of reinforcing wool fibres on fracture and energy absorption properties of an earthen material. Construction and Building Materials. 2012; 27(1):66-72.

[19][19]Silveira D, Varum H, Costa A, Martins T, Pereira H, Almeida J. Mechanical properties of adobe bricks in ancient constructions. Construction and Building Materials. 2012; 28(1):36-44.

[20][20]Chan CM. Effect of natural fibres inclusion in clay bricks: Physico-mechanical properties. International Journal of Civil and Environmental Engineering. 2011; 5(1):7-13.

[21][21]Danso H. Use of agricultural waste fibres as enhancement of soil blocks for low-cost housing in Ghana. Doctoral Dissertation, University of Portsmouth, School of Civil Engineering and Surveying. 2015.

[22][22]Duan XL, Zhang JS. Mechanical properties, failure mode, and microstructure of soil-cement modified with fly ash and polypropylene fiber. Advances in Materials Science and Engineering. 2019.

[23][23]Mielniczuk B, El-Youssoufi SM, Hueckel T. The mechanics of air entry of drying-cracking soils: PHYSICAL models. Computers and Geotechnics. 2021.

[24][24]Vasić MV, Pezo LL, Radojević Z. Optimization of adobe clay bricks based on the raw material properties (mathematical analysis). Construction and Building Materials. 2020.

[25][25]Chandrasekar MK, Zewdie M, Nigussie T. Engineered practices of adobe masonry production in Ziway, Ethiopia. Zede Journal. 2019; 37:13-25.

[26][26]California building standards commission. California building code. International Conference of Building Officials. 2001.